Forum

Hello,

As far as I know, the sound counts a lot in America's army.
So I was wondering, how could I adjust the levels of the volume in my pc?
I have a MacBook Pro (laptop) running windows 8, so I think my sound card is inside the motherboard, so I really don't know if I can install some kind of software to adjust the levels, such as treble and bass!

Thanks!

Increase high-mids and treble.

Increase high-mids and treble.

hello,

thats my idea, but how do i increase it? on windows i can only increase the volume, i cant increase individually the high-mids and treble.. Is there any software that i can install to do it?

thanks

You should have EQ settings on your sound driver dashboard for whatever sound driver you are using.

thats my point, i dont have any equalizer!

Then I recommend downloading a sound driver. I'm assuming you have an on-board sound card, so look up the Realtek HD audio Driver or an equivalent.

thats what i did, i downloaded the realtek HD and i coudn't open the control panel of that drive. So i figured it out that my driver was from AMD Audio... then i downloaded it, open the panel and it doesnt have anything about sound, only about video and graphics... :/

that must be ur video card hdmi output driver lol.

its integrated.. the video and audio driver is integrated, i downloaded them both, the audio and video driver, both AMD, but it opens always the same panel....

Win key + R, dxdiag
post the log

How do i post the log?

are you looking for this?

[code]------------------
System Information
------------------
Time of this report: 2/13/2013, 19:32:00
       Machine name: MACBOOKPRO
   Operating System: Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_rtm.120725-1247)
           Language: Portuguese (Regional Setting: Portuguese)
System Manufacturer: Apple Inc.
       System Model: MacBookPro8,3
               BIOS: Default System BIOS
          Processor: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz (8 CPUs), ~2.2GHz
             Memory: 4096MB RAM
Available OS Memory: 4006MB RAM
          Page File: 2468MB used, 3330MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
 System DPI Setting: 120 DPI (125 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.02.9200.16384 64bit Unicode

------------
DxDiag Notes
------------
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
        Sound Tab 2: No problems found.
          Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (retail)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
          Card name: AMD Radeon 6600M and 6700M Series
       Manufacturer: Advanced Micro Devices, Inc.
          Chip type: AMD Radeon Graphics Processor (0x6741)
           DAC type: Internal DAC(400MHz)
        Device Type: Full Device
         Device Key: Enum\PCI\VEN_1002&DEV_6741&SUBSYS_00E3106B&REV_00
     Display Memory: 2759 MB
   Dedicated Memory: 1012 MB
      Shared Memory: 1747 MB
       Current Mode: 1920 x 1200 (32 bit) (60Hz)
       Monitor Name: Generic PnP Monitor
      Monitor Model: Color LCD
         Monitor Id: APP9CCF
        Native Mode: 1920 x 1200(p) (59.950Hz)
        Output Type: Internal
        Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1140 (English)
     Driver Version: 8.982.0.0
        DDI Version: 11
     Feature Levels: 11.0,10.1,10.0,9.3,9.2,9.1
       Driver Model: WDDM 1.2
Graphics Preemption: DMA
 Compute Preemption: DMA
  Driver Attributes: Final Retail
   Driver Date/Size: 7/28/2012 02:13:56, 1100288 bytes
        WHQL Logo'd: Yes
    WHQL Date Stamp:
  Device Identifier: {D7B71EE2-2401-11CF-AF77-E920BEC2C535}
          Vendor ID: 0x1002
          Device ID: 0x6741
          SubSys ID: 0x00E3106B
        Revision ID: 0x0000
 Driver Strong Name: oem51.inf:cb0ae41465ceac91:ati2mtag_VancouverA:8.982.0.0:pci\ven_1002&dev_6741
     Rank Of Driver: 00E02001
        Video Accel: ModeMPEG2_A ModeMPEG2_C
        DXVA2 Modes: DXVA2_ModeMPEG2_VLD  DXVA2_ModeMPEG2_IDCT  DXVA2_ModeH264_VLD_NoFGT  DXVA2_ModeVC1_VLD 
   Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                     {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2)

I searched a bit, looks like ur audio driver havent an own mixer/EQ, you will have to use windows mixer and no EQ.

oh ok.. but isn't there any software(equalizer) that i can install on windows, and then equalize the levels of the output of every sound that the computer is reproducing?