AAO25.com
Assist => Support => Server Support => Topic started by: Vanoke on Wednesday, December 03, 2014, 17:54:03 PM
-
Accessed none pri for one server auth retry for a 10 maps all don t work for Street server can it be main server assist.
Becose this problem i did a total new software downlode and install , but still the same Accessed none pri.
Auth retry
Auth retry
Auth retry
Auth retry :shock:
-
Accessed none is normal, it's from the PB messages. Auth Retry is not normal, it can't communicate with the auth server for some reason.
-
check the router vanoke, try to change the ports (but dont forget to configure the router about that).
-
Its a modem and router together , i can understand way a change off ports will solf the isue.
1720 , 2900,2711, its all about accept the port numbers
I will if i have time look into Streets router if ther is a change in firewall ore in forwarding >> UDP
Meaby a restart of the software in the modem ??
He already restarded the modem and the computer . look like no results.
-
vanoke, sometimes other software is using a port which you may use for aa2 - then it can make this happen.
did to me, why not to you :)
if you are familar with configuring the ports, then just make a test with 2716, 3716. you can not loose, only win.
-
I will try that to merlin thx for support.
vanoke, sometimes other software is using a port which you may use for aa2 - then it can make this happen.
did to me, why not to you :)
if you are familar with configuring the ports, then just make a test with 2716, 3716. you can not loose, only win.
-
1- I did puth in 1 new port but the same.
2 - deleted all local files that was in the past a problem .
3 - open manager as admin.
4 I found SO files were the don`t must be, after a clean relode all software i deleted them but no result >>>
(https://aao25.com/forum/proxy.php?request=http%3A%2F%2Fimagizer.imageshack.us%2Fv2%2F1024x768q90%2F674%2FjK7pgR.jpg&hash=c87d568b1153d1b1347ecc2854b9d5dc) (https://imageshack.com/i/iqjK7pgRj)
5- i see all ports are tested and open nothing in fire wall blocked.
This computher is only jused for assist nothing more.
6 - i led the 1first 3 server open and they are on Assist browser but no ping can sumbuddy check main server if ther is a connaction problem on mac ore ip from this computer THX.
-
it must be a port problem vanoke.
while server starts, you can see port testing - ok.
but this means nothing. i did have this too, only chaning the ports did help at my end.
maybe an other program is disturbing your connection.
-
and your ip is not responding - so fix your connection.
-
Problem solft If you go into Modem you can go to section wireless / radio/ ther you can change to control channel from 1 / 9 . you can Scan Wireless APs than you can see Nearby wireless Access points. You see RSSI and the channels from nearby connaction and i did change that to a better connaction we can chose between 1 , 6 , 11 what i did heard.
So after that you get a software reset and on that point de modem did go in the gateway in options to " WAN Blocking Enable " after i dit puth it out the server maps did work.
i hope the rest will work.
thx merlin .
It did has to do whit what you say ip not reading.
Its stupit the older you get the more you learn and than you die. :?
-
...
Its stupit the older you get the more you learn and than you die. :?
'Experience is a cruel teacher, it gives you the exam first and the lesson later.'
-
:D