AAO25.com
America's Army => General Chat => Topic started by: Goncalo on Wednesday, January 23, 2013, 18:54:09 PM
-
- Download tcpoptimizer: http://www.speedguide.net/downloads.php
choose ur download speed, network card, check "modify all network adapters"
and also check optimal settings then apply changes. rebot pc.
- Open aasist click settings, then AA settings. americas army should open.
click your console button, type open urban_assault, now your in offline mode, type "pb_system 0" "pb_sslog 0" and "pb_sleep 500" finally write "pb_writecfg" to save all the changes. also uncheck "dynamic netspeed" on americas army options.
-http://www.cfos.de/cfosspeed-v900.exe download and install. when your done, right click on taskbar icon from this program, traffic shapping, and choose the options that says ping
for windows XP users:
-go run, type gpedit.msc, under computer configuration click administrive templates, open network folder, then QoS packet sheduler. open limit reservable bandwidth, select enabled and type 0% under bandwidth limit. click apply and rebot
for windows 7 users:
http://windows7themes.net/disable-bandwidth-limit-in-windows-7-speed-up-your-internet.html
download spybot or ad-aware and you should be fine now.
-
good job!
-
Punkbuster Commands
PB Server Commands:
pb_sv_Enable //Enable PunkBuster
pb_sv_Disable //Disable PunkBuster
pb_sv_Ver //Display current PB Server version information
pb_sv_Plist //Display list of currently connected players
pb_sv_BadNameList //Display list of Bad Names
pb_sv_BanEmpty //Empties ban list in memory
pb_sv_BadName [grace seconds] [banned text] //Add Badname
pb_sv_BadNameDel [slot #] //Delete Bad Name
pb_sv_Restart //Restart PB Server
pb_sv_Update //Force PB Server to check for Updates
pb_sv_WriteCfg [filename (default=pbsv.cfg)] //Save settings
pb_sv_CvarList //Display list of allowed Cvar Ranges
pb_sv_CvarVal [Cvar name] [player] //Request value of Cvar
pb_sv_Cvar [Cvar name] [type] [range] //Add Cvar Range
pb_sv_BindSrch [search text] [player] //Request matching binds
pb_sv_CvarSrch [search text] [player] //Request matching Cvars
pb_sv_CvarUser [player] //Request list of user-defined Cvars
pb_sv_CvarChanged [player] //Request list of non-default Cvars
pb_sv_BanLoad [optional filename] //loads bans from file
pb_sv_UnBan [ban slot #] //unbans a guid in memory
pb_sv_ReBan [ban slot #] //rebans an unbanned guid in memory
pb_sv_UpdBanFile [optional filename] //updates ban file
pb_sv_CvarEmpty //Empties cvar list in memory
pb_sv_CvarDel [Cvar slot #] //removes a cvar check from memory
pb_sv_Power [slot #] [power rating] //add player power record
pb_sv_BanGuid [guid] [name] [ip] [reason]
pb_sv_UnbanGuid [guid]
pb_sv_PowerList [guid/name filter]
pb_sv_PowerPoints [player power slot #] [points]
pb_sv_Load [filename] //Load PB config file
pb_sv_BanList [optional search text] //Display list of bans/kicks
pb_sv_Ban [slot # /name] [reason | private] //Perm Ban from Server
pb_sv_Kick [slot # /name] [minutes] [reason | private] //Kick from Server
pb_sv_GetSs [slot # or "search text"] //Request Screenshot(s)
PB Server Settings:
pb_sv_MsgPrefix [PB Message Prefix (default=PunkBuster Client)]
pb_sv_MaxDlRate [KB/sec requested per file (default=4)]
pb_sv_MaxConDls [concurrent downloads (default=1)]
pb_sv_KickLen [minutes (default=2)]
pb_sv_CvarFreq [# of range checks per minute]
pb_sv_CvarLogging [1=Reg. Log, 2=Var Log, 3=Both, 0=Neither]
pb_sv_CvarWalk [0=disabled, 1-4=Walk through obtained Cvar lists]
pb_sv_CvarUserPulse [How often (in min.) to auto-send CvarUser command]
pb_sv_CvarChangedPulse [How often (in min.) to auto-send CvarChanged command]
pb_sv_CQC [0=No, 1=Yes (default=1)]
pb_sv_LogSync [0=No, 1=Yes (default=0)]
pb_sv_LogCeiling [High log filename serial #]
pb_sv_LogNext [Next log filename serial #]
pb_sv_SsFloor [Low screenshot filename serial #]
pb_sv_SsCeiling [High screenshot filename serial #]
pb_sv_SsNext [Next screenshot filename serial #]
pb_sv_SsCmd [Filename of system command to run after screenshots]
pb_sv_SsWidth [Requested pixel width of remote screenshots]
pb_sv_SsHeight [Requested pixel height of remote screenshots]
pb_sv_SsXpct [Percentage across screen for remote screenshots]
pb_sv_SsYpct [Percentage down screen for remote screenshots]
pb_sv_SsSrate [Sample Rate for remote screenshots]
pb_sv_SsDelay [Maximum delay client waits before capturing screenshot]
pb_sv_SsPath [Path where remote screenshots are saved]
pb_sv_AutoSsFrom [Minimum # of seconds to wait before requesting next ss]
pb_sv_AutoSsTo [Maximum # of seconds to wait before requesting next ss]
pb_sv_AutoSs [0=No, 1=Yes (default=0)]
pb_sv_Sleep [# of Milliseconds (default=60)]
pb_sv_PowerMin [power points]
pb_sv_PowerDef [power points]
pb_sv_PowerKickLen [minutes (default=5)]
pb_sv_httpPort [port #]
pb_sv_httpAddr [external IP Address]
pb_sv_httpRefresh [seconds]
pb_sv_httpKey [key]
pb_sv_httpMaps [map list (separate by spaces)]
pb_sv_scoreKick [minimum score (negative)]
pb_sv_changePeriod [seconds]
pb_sv_changeMax [max name changes allowed]
pb_sv_autoUpdBan [0=No, 1=Yes (default=0)]
pb_sv_extChar [0=No, 1=Yes (default=0)]
pb_sv_dupNameGrace [seconds]
pb_sv_guidRelax [1=UNKN, 2=WRONGIP, 4=DUP (add desired values)]
pb_sv_LogUser [remote_log_username]
pb_sv_LogPw [remote_log_password]
pb_sv_LogAddr [remote_log_address]
pb_sv_LogPort [remote_log_port]
PB Client Commands:
pb_cl_Enable //Enable PunkBuster
pb_cl_Disable //Disable PunkBuster
pb_Load [filename] //Load PB config file
pb_Ver //Display current PB Client version information
pb_Plist //Dispaly list of currently connected players
pb_SsOptions //Set local PB screenshot options
pb_GetSs //Capture local PB screenshot to a file
pb_CvarList //Display list of server-required Cvar Ranges
pb_CvarVal [Cvar name] //Display server-side Cvar value
pb_BindSrch [text] //Display key bindings containing text
pb_CvarSrch [text] //Display Cvars containing text
pb_CvarUser //Display local user-created Cvars
pb_CvarChanged //Display local Cvars not = default value
pb_WriteCfg [filename (default=pbcl.cfg)] //Save settings
pb_RegNameFull [match] [password] //Add Registered Name
pb_RegNamePartial [match] [password] //Add Registered Partial Name
pb_RegNameDel [slot #] //Remove a Registered Name
pb_RegNameList //List Registered Names
pb_Power //Display Player Power Information
pb_Kick [slot #] //'Vote' to kick another player
PB Client Settings:
pb_MsgPrefix [PB Message Prefix (default=PunkBuster Client)]
pb_Security [0=No, 1=Yes (default=1)]
pb_Sleep [# of Milliseconds (default=250)]
pb_LogToFile [0=No, 1=Yes (default=0)]
pb_SsLog [0=No, 1=Yes (default=1)]
pb_SsSave [0=No, 1=Yes (default=0)]
pb_RegNameFn [Filename for Registered Names]
pb_RegNamePw [Encryption Key for RegName Files]
pb_LogUser [remote_log_username]
pb_LogPw [remote_log_password]
pb_LogAddr [remote_log_address]
pb_LogPort [remote_log_port]
-
not all of them are still working with aa2, right?
-
they should be working :P
-
*bump* this will help you reduce ping
-
updated, possessed or someone, need your help here
-
what :)
-
this limited bandwidth thing for windows 7 or vista. I have xp, already posted how to do it.. need some1 to write it for 7 or vista
-
ah im on xp too
-
Gonçalo here:
http://windows7themes.net/disable-bandwidth-limit-in-windows-7-speed-up-your-internet.html
-
if the system has to download updates blabla windows will use the 20% reserved if you are using your connection, out of that it should not cap ur bandwidth.
-
this fix not working for me
-
you did everything i said here? everything at all? even searched for spywares? then its your ISP problem.
-
well i saw kriz geting md5 last nite too :-))
-
be carful with that changes guys....
at the end you get kicked because of that
-
I remember filka was getting kicked alot, ask him what he did? and i get kicked much less now, and check if you have pbcl.cfg in your pb folder.
-
pb_system changes the way pb scan, effect may be different for each user.
-
its a fact, this really helped some ppl. some dont get kicked anymore, other get kicked much less time
-
hi guys,
im a xp user and in the last 24 hours in getting kicked for md5 tool so i have been following the top instructions but when i go into administrative templates there is no network folder at all, i only have a windows components folder.. im guessing im doing something wrong but dont know what if someone could help plz help me !!!
-
Is there any file where i can check these configures? Im not geting MD5 kicks at all, but my clanmates doese. Il be glad to share the file with them, if it could help them out.