AAO25.com
America's Army => General Chat => Topic started by: kMx on Sunday, November 24, 2013, 13:44:09 PM
-
Hello,
so im running a server on a windows vps , players can connect , no problem.
When it comes to register the server at battletracker.com it returns this message :
Gameserver offline or not responding on this IP:Port ...
I have added this ports to the firewall in the inbound and outbound rules :
Incoming UDP Ports:
1716, 1717
Outgoing UDP Ports:
20046, 20047, 27900
Also all ports are forwarded
Anyone know what can be the cause of this ?
-
What is the server IP?
-
5.135.99.0
-
ur fast kMx :) yea eliz you can help us?
-
I got the image of the FW rules.
Rules looks ok, AAO2 and AAO3 could be joined to this
UDP
20046-20047,27900
But should not be the source of your problem.
When you mentioned VPS, I got an image of Linux in my head.
If it was my server, I would turn the firewall off temporary to verify that the FW was actually the problem.
-
ok i will do in a bit , meanwhile i just noticed i can not access battletracker.com from the vps , so this is probably the cause? it is blocking traffic ftom and to battletracker
edit:disabling firewall did not work
-
Then there must be something in between the host and BT.
another FW or proxy?
If you ping battletracker.com, what is the result?
I get response from 87.230.61.216, not sure if that's the IP used to the GameSpy queries to your server.
-
Then there must be something in between the host and BT.
another FW or proxy?
If you ping battletracker.com, what is the result?
I get response from 87.230.61.216, not sure if that's the IP used to the GameSpy queries to your server.
well i dont get any reply , says request timed out
-
Might be an issue on their side, might have your Server blocked for some reason.
-
you IP ending with a 0 is strange
-
you IP ending with a 0 is strange
if you are running a network with the MASK of 255.255.255.0 then having an IP ending would be bad.
But since a network can be subnetted into larger chunks, 0 could be perfectly fine if it in the middle of the range.
But BT might be coded in such a way that an IP ending with .0 is treated in a special way.
-
i do have an other meaning about ip ending with a zero.
this is really not good, even a 1 should only be used for a router.
try to change it into something greater then 0 or 1 and try again.
-
i do have an other meaning about ip ending with a zero.
this is really not good, even a 1 should only be used for a router.
try to change it into something greater then 0 or 1 and try again.
I tested joining the server last night without any issues at all, even if the server had an IP ending with 0 :)
Might be hard for them to get the hoster to change their IP, but it might be worth a shot to get BT tracking working.